| CONTENT | |
Dust Ignition-proof Street Lights
Features
1. Mounting lighting fixtures according to kind of explosion-proof have: isolating explosion, increased safety, isolating explosion and increased safety.
2. Lighting fixtures use the material:
a. Casting aluminum alloy enclosure, the surfaces are sprayed with plastics. High strong quench glass lampshade.
b. Casting aluminum alloy enclosure, the surfaces are sprayed with plastics. Poly-carbonate lampshade.
c. Fibreglass reinforced polyester resin enclosure, Poly-carbonate lampshade.
3. Lighting fixtures use the light source: incandescent, mercury vapor, sodium, metal halide, fluorescent.
4. Street light pole: cylinder, taper and taper with hexahedron.
5. The pole is a zinc-plated steel tube, the surfaces are sprayed with plastics or zinc, it may prevent erosions.
6. Street light type: one street light and double street light.
7. The lighting fixture, ballast, base and height of pole may be specify by user.
8. User may choose all of kind explosion-proof lighting fixtures and suitable pole by site's situation.
Base of Street Light
 |
May put in one ballast |  |
May put in two ballasts |
Mounting Ignition-proof Lighting Fixtures
1. CDG-1 Dust Ignition-proof Street Light
|
|
The enclosure is made of casting aluminum alloy, the surfaces are sprayed with plastics, it may prevent erosions. The lampshade is made of quench glass, it is very strong. There are some ribs of radiating heat outside, so it can give off heat. The reflector is made of stainless steel plate, so the lighting is high efficiency and soft. The parts of connecting and inlet have some seals. |
 |
Specification: 1. Light source: Incandescent, Mercury vapor, Metal halide 2. Voltage: 220V 3. Watt: Incandescent: 200, 300W Mercury vapor: 125, 160, 175, 250W Metal halide: 175, 250W 4. Ex-mark: DIP DT T13 5. Protective-class: IP65 6. Erosion-proof-class: W, WF1, WF2 7. Inlet size: G20 8. Cable dia.: φ8~φ15 |
2. CDG-2 Dust Ignition-proof Street Light
|
|
The enclosure is pressed with steel plate, the surfaces are sprayed with plastics, it may prevent erosions. The lampshade is made of quench glass, it is very strong. The reflector is nickel-plated, so the lighting is high efficiency and soft. The parts of connecting and inlet have some seals. |
|
Specification: 1. Light source: Incandescent, Mercury vapor, Metal halide 2. Voltage: 220V 3. Watt: Incandescent: 200, 300W Mercury vapor: 125, 160, 175, 250W Metal halide: 175, 250W 4. Ex-mark: DIP DT T13 5. Protective-class: IP65 6. Erosion-proof-class: W, WF1, WF2 7. Inlet size: G20 8. Cable dia.: φ8~φ15 |
 |
 |
 |
3. CDG-3 Dust Ignition-proof Street Light
|
The enclosure is made of casting aluminum alloy, the surfaces are sprayed with plastics, it may prevent erosions. The lampshade is made of quench glass, it is very strong. There are some ribs of radiating heat outside, so it can give off heat. |
 |
Specification: 1. Light source: Incandescent, Mercury vapor Sodium, Metal halide 2. Voltage: 220V 3. Watt: Incandescent: 200W Mercury vapor: 125, 160W Sodium: 70, 100W Metal halide: 70, 100W 4. Ex-mark: DIP DT T13 5. Protective-class: IP65 6. Erosion-proof-class: W, WF1, WF2 7. Inlet size: G20 8. Cable dia.: φ8~φ15 |
4. CDG-4 Dust Ignition-proof Street Light
|
The enclosure is made of fibreglass reinforced polyester resin thus possesses good performances such as fine appearance, erosion-proof, resisting static electricity, shock-proof, good thermal stability, etc. The lampshade is made of quench glass, it is very strong. The protecting net of lampshade and all screws are made of stainless steel. The parts of connecting and inlet have some seals. |
 |
Specification: 1. Light source: Incandescent, Mercury vapor, Metal halide 2. Voltage: 220V 3. Watt: Incandescent: 200W Mercury vapor: 125, 160W Metal halide: 70, 100W 4. Ex-mark: DIP DT T13 5. Protective-class: IP65 6. Erosion-proof-class: WF2 7. Inlet size: G20 8. Cable dia.: φ8~φ15 |
5. CDY-1 Dust Ignition-proof Fluorescent Street Light
|
The enclosure is hot-pressed of fibreglass reinforced polyester resin. The lampshade is made of poly-carbonate. It has more advantage, such as fine appearance, erosion-proof, resisting static electricity, shock-proof, good thermal stability, etc. |
 |
Specification: 1. Voltage: 220V 2. Watt: 40, 2зн40W 3. Ex-mark: DIP DT T13 4. Protective-class: IP65 5. Erosion-proof-class: WF2 6. Inlet size: G20 7. Cable dia.: φ8~φ15 |
6. CDY-2 Dust Ignition-proof Fluorescent Street Light
|
The enclosure is hot-pressed of fibreglass reinforced polyester resin. The lampshade is made of poly-carbonate. The lampshade is changed for the quench glass at customer's request. It has more advantage, such as fine appearance, erosion-proof, resisting static electricity, shock-proof, good thermal stability, etc. |
 |
Specification: 1. Voltage: 220V 2. Watt: 20, 30, 40, 2зн20, 2зн30, 2зн40W 3. Ex-mark: DIP DT T13 4. Protective-class: IP65 5. Erosion-proof-class: WF2 6. Inlet size: G20 7. Cable dia.: φ8~φ15 |
7. CDY-3 Dust Ignition-proof Fluorescent Street Light
|
The enclosure is made of casting aluminum alloy, the surfaces are sprayed with plastics, it may prevent erosions. The lampshade is made of poly-carbonate. Lighting fixtures may be rotated between Б90А . |
 |
Specification: 1. Voltage: 220V 2. Watt: 20, 30, 40, 2зн20, 2зн30, 2зн40W 3. Ex-mark: DIP DT T13 4. Protective-class: IP65 5. Erosion-proof-class: W, WF1, WF2 6. Inlet size: G20 7. Cable dia.: φ8~φ15 |
8. CDY-4 Dust Ignition-proof Fluorescent Street Light
|
The enclosure is made of casting aluminum alloy, the surfaces are sprayed with plastics, it may prevent erosions. The lampshade is made of poly-carbonate. The lampshade is changed for the quench glass at customer's request. It is very easy to change tube, just open the lid of end. The parts of each connection and inlet have some seals. |
 |
Specification: 1. Voltage: 220V 2. Watt: 20, 30, 40, 2зн20, 2зн30, 2зн40W 3. Ex-mark: DIP DT T13 4. Protective-class: IP65 5. Erosion-proof-class: W, WF1, WF2 6. Inlet size: G20 7. Cable dia.: φ8~φ15 |
9. CDY-5 Dust Ignition-proof Fluorescent Street Light
|
The enclosure is made of casting aluminum alloy, the surfaces are sprayed with plastics, it may prevent erosions. The lampshade is made of poly-carbonate. It is very easy to change tube, just open the lid of end. The parts of each connection and inlet have some seals. |
 |
Specification: 1. Voltage: 220V 2. Watt: 20, 30, 40, 2зн20, 2зн30, 2зн40W 3. Ex-mark: DIP DT T13 4. Protective-class: IP65 5. Erosion-proof-class: W, WF1, WF2 6. Inlet size: G20 7. Cable dia.: φ8~φ15 |
| CONTENT | |
